Laser Hybrid Weld is perfectly suitable for long, straight weld seams. Laser Hybrid Weld combines a laser beam with a MIG/MAG welding process in one common process zone. You benefit from the advantages of both welding processes. A restricted light beam with focus on the weld is created which is characterised by a very high energy density. The laser beam penetrates the material deeply and forms a keyhole. The MIG/MAG arc following the laser stabilises the process, supports a perfect joining of the edges and improves the gap bridging ability. The main advantages of Laser Hybrid Weld are a deep penetration, low heat input and perfect side wall joints. With Laser Hybrid Weld you increase your productivity due to highest welding speeds. You need less filler material because of the reduced number of welding layers. You reduce the component distortion and avoid extensive reworks thanks to the low heat input. You accelerate your whole production process by means of the reduced weld preparation. Do you wish to combine maximum productivity and minimum costs? Then rely on Laser Hybrid Weld by CLOOS!
Combination of two MIG/MAG arcs for maximum deposition rate
MIG/MAG welding process for thin and thick materials
Focused high-capacity MIG/MAG spray arc for deep penetration and efficient welding
Directionally stable MIG/MAG AC pulsed arc for optimum results when welding demanding materials